|
FEATURES:
· Office or Point of Sale use
· Keyboard Wedge or RS-232
· Laser-Like Operating Range
· PC, Macintosh and USB Models
· Reads All Common Barcodes
· Extensive Data Editing Capability
· Easy Configuration with Barcode Menus
· Accessory Stand for "Hands-Free" Operation
· Easily Replaceable Cable
· Installation and Configuration Manual
Or Call 315-252-3741 8AM to 5PM Eastern
DESCRIPTION:
The GT-7000 is a hand held, gun-type CCD scanner that features "laser-like" performance. Unlike conventional CCD scanners, it is no longer restricted to operating very close to the barcode. Unlike lasers, it has no moving parts and requires no safety precautions. The barcode is illuminated using red light emitting diodes. The CCD used in the unit is similar to that in digital cameras, and takes a picture of the code rather than scanning it. The scanner takes 45 exposures per second, equal to the scan rate of most hand held lasers. The GT-7000 offers USB, keyboard wedge and RS-232 interfaces. The unit reads all common barcodes and is easily set up to operate in most any applications by scanning barcode menus. A unique system allows copying setup parameters from one scanner to another. The extensive data editing capabilities, built into the scanner, minimizes programming at the host computer end.
|
 |
|
TYPICAL APPLICATIONS:
The Keyboard Wedge and USB models are normally used to add a barcode "front end" to existing applications. If these applications normally accept input from a keyboard, this scanner enables the use of barcodes without any software modification. Data from the scanned barcodes appears as though it were typed on the keyboard. The RS-232 model can connect to the COM: port of a PC or any other device designed for EIA/TIA RS-232C communications. Baud rates of up to 38,400 are selectable. All models feature extensive data editing. Barcode data can be reformatted, function keys can be inserted and delimiters or other special characters can be added to the barcode label data. An Accessory Stand is available for "hands-free" operation.
SPECIFICATIONS:
Configuration: Via scanning barcode menus. Complete
Configuration Manual provided.
Barcodes Read: EAN/UPC (including supplements),
Code 39, 2 of 5 (including interleaved,
industrial, matrix and DataLogic), Codabar,
Code 128, Code 93, and MSI/Plessey.
Keyboards: PC/AT, PC/XT, PS/2 Models 30, 50, 60 and 80,
IBM5550, Macintosh ADB.
RS-232: Selectable baud rate from 300 thru 38,400.
Seven or eight bit data word, Odd, Even, Mark,
Space or No Parity. RTS/CTS or Xon/Xoff
Handshaking.
USB: The USB unit emulates a keyboard, and behaves
identical to a keyboard wedge scanner.
Connectors: Keyboard Wedge can be furnished with DIN-5 or
mini-DIN-6 connector. Macintosh unit is furnished
DIN-4 connector. RS-232 Model has DB-9S wired as
DCE (will plug directly into PC COM: port). The
USB Model is furnished with a Type A connector.
Keyboard
Layouts: US, UK, Spanish, French, German, Swiss, Sweedish,
Norwegian, Italian.
Mechanical: Material: ABS Plastic
Weight 5oz. (less cable)
Power: The keyboard wedge model derives its power from the
PC or Macintosh. The RS-232 Model requires an
external power supply furnishing 5VDC±5% at
200 milliamps. Accessory Supply, Model ASP002 is
available.
Scanner to Barcode Distance:
The maximum distance between the scanner and the barcode is a function
of the density of the barcode. Density is usually measured in terms of
the width of the narrowest bar or space in the code. In general, the
wider the bar or space, the further away the scanner can operate. The
distances below are typical for this scanner.
| Narrow Bar Width | Distance |
|---|
| 0.006" | 5.5" |
| 0.010" | 6" |
| 0.013" (UPC Code) | 7" |
| 0.020" | 7.5" |
| 0.040" | 10.5" |
PART NUMBERS:
| Model | Description | Price |
|---|
| GT-7001 | RS-232 with DB9S Connector | $205.00 |
| GT-7003 | Keyboard Wedge with 6-pin mini DIN Connector | $195.00 |
| GT-7004 | Macintosh ADB with 4-pin DIN Connector | $195.00 |
| GT-7005 | USB Model with USB Type A connector. | $220.00 |
| MT-700 |
Accessory Stand |
$22.00 |
| APS002 | Power Supply for GT-7001 | $10.00 |
|
